Main Gear
Large gear door
Click picture to enlarge click again to enlarge
Gear door cut out for mounting hanger
Side view of wood hanger
Door & hanger glued together with Aeropoxy
Tape trmoved
Aeropoxy dried & door ready for assembly
Door installed
Gear retracting
Gear almost up
Gear up & locked
Left Gear
Gear door hinges glued in place with Aeropoxy
Door closed
View of hinge area
Left main gear door linkage
Gear air hoset
Door servo & air hose routed thru rubber gromment
Bottom servo wires are for the aileron & flaps. Top servo wire is for the gear door & two up-down air hose lines.
Right Gear
Opening for gear door servo mounting
Gear door held in place with countersunk screws
Another view
Tail Wheel
Gear servo mounted, note air line routed thru rubber grommet
Door hinge bracket glued in place with Aeropoxy glue.
Ball link hinge connected from door to gear struts
Copyright © 2005-2022 Walt Carnes, All rights reserved.
E-mail me at:
walt.carnes@aol dot com
June 27, 2015
 "17 Gear door cut out for mounting hanger")
 "18 Side view of wood hanger")
 "19 Door & hanger glued together with Aeropoxy")
 "20 Tape trmoved")
 "21 Aeropoxy dried & door ready for assembly")
 "22 Door installed")
 "23 Gear retracting")
 "24 Gear almost up")
 "25 Gear up & locked")
 "13 Gear door hinges iglued in place with Aeropoxy glue")
 "14 Door installed")
 "15 Door closed")
 "16 View of hinge area")
 "9 Left main gear door linkage")
 "10 Gear air hose")
 "11 Door servo & air hose routed thru rubber gromment")
 "12 Bottom servo wires are for the aileron & flaps. Top servo wire is for the gear door & two up-down air hose lines.")
 "2 Goor servo mounted, notr air lin routed thru rubber gtpmment")
 "1 Opening for gear door servo mounting")
 "3 Gear door held in place with countersunk screws")
 "5 Another view8")
 "7 Another view")
 "4 Door hinge bracket glued in place with Aeropoxy glue.")
 "6 Ball link hinge connected from door to gear strut")
 "8 Gear up & locked")
