Glow Fuel Flight Box

PT-17

Glow Fuel Flight Box

I built the glow fuel flight box out of the following material I purchased from Home Depot:

  • 2’x4’ piece of 1/4 inch birch plywood.
  • 5/8 inch wood dowel rod.
  • Finishing corner material.
  • Rust-ileum red paint.
  • Minwax Polyurethane Clear Satin finish. 
  • I used ½ inch screws & Tightbond II wood glue to assemble the Flight Box.

Click on pictures to enlarge, click again for full screen
1 Glow Fuel Flight Box

 Glow Fuel Flight Box
2 Top View shows the 12 volt Starter, Hanger 9 Electric Fuel Pump & Glow Fuel

Top View shows the 12 volt  Starter, Hanger 9 Electric Fuel Pump & Glow Fuel

Copyright © 2005-2022 Walt Carnes, All rights reserved.

E-mail me at:

walt.carnes@aol  dot  com

According to The Weather Channel Control Tower, the weather conditions at the Hanger are: